Entry Guidelines (PDF)
Corks: See Rule 6.
By entering a good show you can establish if your winemaking is
as good as it can be, and if not, by discussion with a Judge you can learn where further improvements could be made.
WHICH WINES TO ENTER: Enter
all the wines you consider to be good quality, don’t just look for one good one to enter.
Select your wines/beers by sight and taste, and not by the name
of the recipe used. Many good wines/beers fail to get prizes because they are in the wrong class.
PRESENTATION: Two points are awarded for presentation and
everyone should get these two points by:
- Using the type of bottle and cork specified in the schedule.
- Leaving the required air space between wine/beer and cork/capsule.
- Placing the correct label where stated in the schedule.
- Ensuring the bottle is clean inside and out. Look for gum smears after fitting the label.
Suit them to the schedule as follows:
APERITIFS: Wines taken before a meal to stimulate the appetite. Aperitifs should have
sufficient acid to taste fresh and leave the palate clean. Alcohol should be between 14% and 17%.
TABLE WINE CLASSES: These wines are meant to accompany the enjoyment of food. They can vary
from light to strong flavour. Table wines are varied in style and colour and are dealt with under separate headings.
RED TABLE WINE DRY: Colour should be red but tints of purple or black or tawny is
acceptable. The wine must be without easily recognizable sweetness. The flavour
can be substantial and should remain in the aftertaste. Some astringency from
tannins is expected, with mellowness and maturity desirable. The bouquet should
be complex and vinous. Acidity should be between 0.45% & 0.65% and the
alcohol from 10% to 14%. Examples such as Bordeaux, Burgundy, Rioja.
WHITE TABLE WINE DRY: Pale colour is desirable, there should be no brown or pink tones. The
wine should taste dry without easily recognizable sweetness. The flavour should
be pleasant with no bitter aftertaste and should give an impression of freshness
leaving the mouth clean. Acidity should be between 0.5% to 0.8% and alcohol
between 9% and 13%. The bouquet should be clean, fragrant & vinous. Examples
such as White Burgundies, Alsace and dry Loire wines.
WHITE TABLE WINE MEDIUM DRY: Pale colour is desirable. The wine must have
easily detected sweetness but not sufficiently predominant to classify it as a
sweet wine. A good balance and flavour is more important than the exact degree
of sweetness. Alcohol should be between 8.5% and 13% and acidity between 0.55%
and 0.90%. Examples would be German wines such as Liebfraumilch and QbA and QmP wines.
WHITE TO GOLDEN TABLE WINE SWEET: Colour can be deeper than for the dry or
medium wines ranging up to golden but should not be dark. The flavour can be
richer than the other wines with the alcohol up to 14%. The acidity should be
between 0.6% and 0.9% sufficient to balance the sweetness and to prevent a
cloying finish. The sweetness should not overwhelm the other characteristics.
This is a wine that is best drunk with fruit or dessert at the end of a meal. An example would be Sauterne.
ROSE TABLE WINE: Commercial examples from the dry Tavel to the medium or medium-sweet Anjou.
The wine should be pink, variations in colour intensity and slight orange or
‘onion skin' tints are acceptable. The flavour must be light, fruity and fresh
and the bouquet should reflect these points. There should not be excessive
astringency. Acidity should be between 0.55% and 0.9% and the alcohol
between 10% and 12% and the whole should be in balance with any sweetness.
AFTER-DINNER WINE RED SWEET: The colour should be deep. Mature wines
may have tawny characteristics but should display some red colour. The flavour
should be rich fruity and vinous, the whole being mellow and mature. Acidity
should be between 0.45% and 0.7%. The alcohol should be as high as may be
achieved by fermentation. The wine should be as sweet as the other
characteristics will permit without it becoming cloying. Although this wine is
often called ‘Dessert’ it is meant for drinking after dinner. Examples would be Mavrodaphne of Patras 15% to Port 22%.
AFTER-DINNER WINE WHITE TO BROWN SWEET: Here a wide range of colours is acceptable
with the deeper colours usually providing the best wines but there must be no
Red colouring. Acidity should be between 0.5% and 0.9%. All other
characteristics are as After Dinner Wine Red Sweet. Examples Madeira, Muscat & sweet Oloroso Sherries.
FORTIFIED WINES - Madeira Type:
Wines in this class should emulate the Malmsey type of wine. This is a fortified, luscious, sweet ‘After-Dinner’ wine.
The colour is deep tawny. The wine is full bodied and has a full sweet flavour
with caramelised overtones on the farewell. The sweetness is balanced by a
fairly high level of acidity. The final Specific Gravity should be from 1.025 to
1.050, alcohol about 18% and the acidity as tartaric acid about 0.6% to 0.7%.
WINES BY INGREDIENT: These wines can range from light dry table to full bodied sweet
after-dinner wines. The main criteria are that the wine should be clean and
sound and that it is in balance for the particular class in which it is entered.
When judging named ingredient classes one can often detect other ingredients and
while these may improve the wine they may blur recognition of the named
ingredient. Provided that they do not predominate over the named ingredient the entry is acceptable.
MEAD: Mead is essentially a
wine whose character is derived from the use of honey, as the major source of
fermentable sugar. Variants with added fruit juice and/or herbs and spices are
acceptable. A wide range of colours is acceptable, including red where red fruit juice is added.
SPARKLING WINE: This wine must contain carbon dioxide produced by a secondary
fermentation in the bottle. Although this wine is usually white both red and
rosé may be entered. Even though the wine may be specified as dry a small amount
of recognizable sweetness is acceptable. Acidity may range from 0.6% to 0.9% and
alcohol from 10% to 12%. The commercial example is Champagne.
Homemade liqueurs are strong (usually 25-40% alcohol), sweet, and highly
flavoured after-dinner drinks. Many flavours and styles are encountered but they can be divided into four general groups.
- Fruit base: e.g. alcohol infusions using various fruits (approx. 25-35%
alcohol: 35-40% for orange liqueurs such as Cointreau and Grand Marnier).
- Chocolate/Coffee base: e.g. Tia Maria, cacao types etc. (approx. 25-30% alcohol).
- Herb/Spice base: e.g. peppermint, aniseed and more complex blends such as
Benedictine types (approx. 30-40% alcohol, with Green Chartreuse an exception at 55%).
All beers entered should be bottle matured and should have a firm and light yeast deposit. The beers should be
conditioned to give a fine running bead and close-knit head. Head retention should be good although beers high in alcohol may have little head
retention. Acidity should not be predominant in any of these beer types. The definitions used in the NGWBJ handbook are fairly broad. Although
they are derived in the main from classic English beer styles, there is no implication that beers have to adhere strictly to the use of English
hops. Many brewers now use American or other foreign hops, particularly in their pale ales. Provided that the beer conforms to the NGWBJ
guidelines for that style (e.g. it is not excessively hoppy for the style), then the use of non-English hops should neither be penalised nor
favoured by judges when assessing beers.
DARK MILD: A
lightly hopped beer with an O.G. of 35-42. The colour may range from light to
dark brown. The flavour will have a delicate blend of malt and roast grains. Alcohol content will range from 3.5 - 4.5%.
BELGIAN GOLDEN STRONG ALE: O.G. 70-90, alcohol content of 7 – 9%. This is a yellow to medium
gold strong ale exhibiting a blend of moderate fruity/spicy/hoppy character. It should be well attenuated without any cloying sweetness.
A good white head and excellent bead is desirable.
Flavour should be a complex blend of fruity esters, some spiciness and overall soft malt character with some mellow warming alcohol present. Hop bitterness
should be smooth and complementary – not dominant.
Ingredients are typically Pilsner malt with some type of fermentable sugar to assist with attentuation and a dryish finish. Lager hops and/or Styrian Goldings
are typical. A suitable Belgian yeast should be used to ensure appropriate character with fermentation temperature slightly raised.
A good commercial example would be Duvel, often available in some supermarkets.
ENGLISH IPA: This full bodied premium bitter has an O.G. of 50-60 and a rich golden
to deep copper colour. The bouquet should be hoppy and grainy. The flavour
should be full malty and grainy with a predominant hop and clean bitter
farewell. There should be a little residual sweetness to balance the hop. Alcohol 5-6.5%.
WHEAT BEER This is a young fresh fast
maturing beer, pale straw to dark gold in colour, with an OG of 45-55. It is
typically brewed using up to 50% wheat malt and is often cloudy. It should be
highly carbonated with a thick, well retained head. Yeast derived flavours,
from using the correct type of yeast, are needed and can be fruity and spicy,
with phenolic clove and banana like flavours amongst others. Belgian styles
often use unmalted wheat, producing a bready/grainy flavour, and may be
flavoured with coriander and orange peel. Hop bitterness, flavour and aroma
should be low, with a soft finish on the palate. Commercial examples include
Hoegaarden, Schneider-weisse, Erdinger and Franziskaner.
LONDON BROWN ALE: Original gravity of 35-40 giving an alcohol level of 3.5-4%. Colour may
vary from light to dark brown. The bouquet is malty backed by caramel. The beer
should be sweet on the palate giving a smooth blend of malt and caramel with a low hop flavour.
NEWCASTLE BROWN ALE: The O.G. of 45-50 is reflected in an alcohol level of 4.5-5.0%. The
colour should be a light reddish brown and the bouquet a blend of caramel and
hop. The flavour should be full-bodied blend of caramelized malt with medium bitterness and noticeable sweetness.
BELGIAN DUBBEL ALE: O.G. 70-80. Alcohol content 7-8%. This is a dark strong ale exhibiting a
blend of rich, toasted, caramel with a fruity essence and with a rocky head. It should be well attenuated without any cloying sweetness.
Dark amber-brown in colour with usually good clarity. Head retention may be adversely affected by alcohol content in stronger versions. A good white head and
excellent bead is desirable.
Flavour should be a complex blend of fruity esters, some spiciness and overall soft malt character but no roasted malt aroma with some mellow warming alcohol
present. Hop bitterness should be smooth and complementary – not dominant.
Ingredients are typically Pilsner malt with a range of other malts which could include Munich, crystal, cara, roast barley, chocolate and Special “B” and some
type of fermentable sugar to assist with attentuation and a dryish finish. Lager hops and/or Styrian Goldings are typical. A suitable Belgian yeast should be
used to ensure appropriate character with fermentation temperature slightly raised.
Medium to full body. Warming mouthfeel from alcohol. A dark, rich, malty, moderately strong ale.
A good commercial example would be Chimay Red, La Trappe Dubbel or Grimbergen Dubbel, available in some supermarkets or specialist beer shops.
This beer has an O.G. of 45-50 and an alcohol content of 4.5 - 5.0%. The bouquet should be that of roasted grain. The flavour should be of roasted grains full
and dry with a long hard bitter finish. The colour is almost black.
O.G. of 40-55. Colour is dark garnet to almost black. Dark malts dominate the bouquet and flavour, bitterness is slight.
Alcohol ranges from 4 to 5.5%. "Milk" stouts, sweetened with lactose have a high residual sweetness. Oatmeal versions
are less sweet but full bodied and can have an oily mouthfeel.
OG 45-55. A very dark full bodied, roasty, malty ale with oatmeal flavour. Roasted grain aromas often with coffee like character carry through to the flavour.
Low hop aroma. It should have some sweetness but is not as sweet as sweet stouts. An oily mouthfeel from oatmeal is acceptable. The oats used may or may not
be malted. A commercial example would be Samuel Smith’s Oatmeal Stout.
AMERICAN IPA: O.G. 60-70, alcohol 6– 7.%. The balance of this beer is hop forward, with a clean
fermentation profile, dryish finish, with supporting malt allowing the hop character to shine through.
Aroma: Can range from prominent to intense hop aroma featuring characteristics of American or New World hops. A low to medium low clean, grainy-malty aroma
may be found in the background.
Colour: Ranges from medium gold to light reddish-amber.
Head retention should be medium-sized, white to off-white with good persistence.
Flavour: Hop flavour is medium to very high and should reflect an American or New World hop character. Malt flavour should be low to medium low.
Dry to medium-dry finish; residual sweetness should be low to none. The bitterness and hop flavour may linger into the aftertaste but should not be harsh.
beer has an O.G. of 60-70 and an alcohol content of 5.5 - 7%. With a colour of
dark brown to black, with a predominance of brown and chocolate malts on the
bouquet and in the flavour. The flavour should also be full, with some residual
sweetness to balance the hop and roast grains.
BARLEY WINE: Colour ranges from golden to brown. O.G. is from 90 upwards. The bouquet
should be rich fruity hoppy alcoholic and vinous. The flavour should be full and
malty with a smooth and mature blend of sweetness, hop and alcohol. Alcohol content will be 9% or greater.
BITTER: Original gravity should be from 40-55 and the
colour from golden to deep copper. The aroma of hops in the bouquet should lead
to those of malt and grain. The flavour should be full, malty and grainy with a
hoppy bitter farewell and perhaps a little sweetness from residual dextrins. Alcohol content 4-5%.
PALE LAGER: Original gravity (O.G.) should be from
40-50. The beer should be of a light to medium golden colour and the bouquet a delicate blend of hops, malt and DMS (dimethyl
sulphide). The flavour should be dry, clean and refreshing, light to medium in malt and hops. Alcohol normally ranges from 4-5.5%.
STRONG LAGER: With an O.G. of 50-65, alcohol content ranges from 5-7%. Colour varies from
golden to amber. The bouquet should be malty and grainy with slight DMS and a
good hop balance. The beer should be full bodied with a malty flavour, a firm
hop background and perceptible alcohol. Some sweetness due to dextrins may be apparent.
AMERICAN PALE ALE: OG 1045-1060; alcohol 4.5-6%. This is a pale refreshing beer with a moderate
to strong aroma from American or new world hops.
The taste should be clean with a light to moderate mouth feel and a dry finish. Hop flavour and bitterness can linger on the aftertaste but should not be
harsh or astringent. Late and/or dry hopping will all add to the hop flavour.
Speciality malts [crystal, amber etc] may be used but should support rather than distract from the clean malt / hop taste.
Colour should be pale to light gold with a large white to off white head and a fast running bead.
A commercial example would be Sierra Nevada Pale Ale which is available in many supermarkets.
O.G.50-65 and alcohol content of 5.0-7.0%. Often a distinctive pale orange but may be golden or amber in colour. Fruity aroma, reminiscent of citrus with low to moderate hop, and
possibly hints of spice. A refreshing, fruity/spicy ale, highly carbonated, with a dry finish, quenching acidity and moderate hop bitterness.
Wine and Beer definitions from 2000
NGWBJ Handbook with kind permission.
2020. BLACK IPA O.G. 1050-1070; alc. 5-7%. Sometimes called Cascadian Dark Ale to avoid the
contradiction in the name, Black IPA is very dark brown to black. The colour derives from using around 5% Carafa special III with other caramalts which give
the required colour without the harshness/astringency often associated with other highly roasted grains. The colour of the head should be tan. It has a
moderate to high hop aroma from Northwest American hop varieties. Malt aroma may be present but is relatively light.
In the mouth a medium bodied beer, the hop aromas follow through on to the flavour which can be citrusy, piney or resinous, dark malt flavours are medium to
low and should not clash with the hops. The finish should be dry. The bitterness may linger into the aftertaste but should not be harsh.
A good example is Conqueror from Windsor and Eton. It is currently only available from specialist beer shops.
2021. IRISH RED ALE OG 1040-1050;Medium amber to medium
reddish-copper colour, with low off-white to tan coloured head. Low to moderate malt aroma with light caramel and low hop. Grainy palate with light
biscuit notes and a light taste of roast grain. Moderate hop bitterness. A less-bitter and hoppy Irish equivalent to an English Bitter, with a dryish finish
due to roast grain.
More detailed definitions of the above beers can be found at The
BJCP web site.
Return to Top of Page
|Developed by: Elaine Robinson
||For further information, contact:
|Sponsored by: Jim Parrack
||Copyright ©: 2002 NAWB